I-ASTM i-A1008 i-Pickled Steel Coil

Ii-FAQs

• Umbuzo: Ngaba unokubonelela ngemilinganiselo yesiko okanye iingubo?

  Ngokuqinisekileyo. Sinikezela ngeeNkonzo eziNzululwazi zokuLungisa:
  - Imilinganiselo: Ububanzi 200–2,000 mm, Ukutyeba 0.3–25 mm
  - Ukwaleka: Izinc elawulwa ngokuchanekileyo (20–275 g/m²) okanye inkonkxa (1.1–11.2 g/m²) iileya
  -Ukugqitywa komphezulu: iinketho ezili-10+ (i-matt, isipili, i-embossed, njl.)
  - Ingxelo enokwenzeka inikezelwe kwiiyure ezingama-48 kwizicelo zesiko
  

• Umbuzo: Ngawaphi amandla okuqina / isivuno okanye amaxabiso obunzima beemveliso?

  A: Iipropati ziyahluka ngokwenkqubo (umzekelo, iikhoyili eziqiniswe ngokubanda: 1,200 MPa amandla okuqina; ialloy ye-Zn-Fe: 150–220 HV ubulukhuni). Idatha eneenkcukacha ziyafumaneka kwiinkcukacha zobugcisa okanye xa ziceliwe.

• Umbuzo: Ngaba unokubonelela ngemilinganiselo yesiko okanye iingubo?

  Ngokuqinisekileyo. Sinikezela ngeeNkonzo eziNzululwazi zokuLungisa:
  - Imilinganiselo: Ububanzi 200–2,000 mm, Ukutyeba 0.3–25 mm
  - Ukwaleka: Izinc elawulwa ngokuchanekileyo (20–275 g/m²) okanye inkonkxa (1.1–11.2 g/m²) iileya
  -Ukugqitywa komphezulu: iinketho ezili-10+ (i-matt, isipili, i-embossed, njl.)
  - Ingxelo enokwenzeka inikezelwe kwiiyure ezingama-48 kwizicelo zesiko
  

• Umbuzo: Uqinisekiswa njani umhlwa/ukumelana nokunxiba?

  A: Ukuxhatshazwa kwe-Corrosion kuphuculwe ngokuyila i-alloy (umzekelo, i-Zn-Ni, i-Fe-Zn layers), ulawulo lwe-porosity (

• Umbuzo: Yintoni ubuncinane ubungakanani bomyalelo (MOQ)?

  I-MOQ eqhelekileyo iqala kwiitoni ezi-5 kuphela kunye nee-odolo zesilingo eziguquguqukayo:
  - Iikhoyili ezishushu-eziqengqelekayo/ezibandayo: Ikhoyili e-1 (~ iitoni ezi-3)
  - Iikhoyili ezenziwe ngegalvanized/tinplate: iikhoyili ezi-2
  -Iinkcukacha zesiqhelo: iitoni ezili-15 (iinkcukacha ezixutyiweyo ezi-3 zivumelekile)
  

• Umbuzo: Uqinisekisa njani ukufunyanwa kwesiphene kwimveliso kunye nokungaguquguquki?

  A: Inkqubo epheleleyo yolawulo lomgangatho ibandakanya uvavanyo lwe-eddy-yangoku (> 0.1 mm ubhaqo lokuqhekeka), ukulinganisa ubukhulu, kunye novavanyo lwesitshizi setyuwa. Ikhoyili nganye inikwe iSatifikethi soVavanyo lweMaterial (MTC) kunye nengxelo yokuhlola.

• Umbuzo: Uluhlu lweenkcukacha eziqhelekileyo?

  A: Ukutyeba: 1.5mm ukuya ku-20mm (ukulungiswa ngokomgca wemveliso)
  Ububanzi: 600mm - 2200mm (ubuncinane/ubukhulu bemilinganiselo mayiphawulwe)
  I-diameter yangaphakathi: Φ610mm (eqhelekileyo) okanye Φ508mm (nceda uqinisekise umgca wemveliso yenkampani)
  I-diameter yangaphandle: Imiselwe ubunzima bomqulu, ngokuqhelekileyo ≤2500mm

• Umbuzo: Indlela yokupakisha kunye nokuthutha?

  A: Ukupakishwa okuqhelekileyo: Iphepha elinobungqina bokufuma + intsimbi yokubopha ibhande, okanye ukupakishwa okulungiselelwe ngokweemfuno zabathengi (njengamatyala omthi, ifilimu engenamanzi);
  Iindlela zothutho: uthutho ezindleleni, uthutho lukaloliwe, uthutho elwandle. Sinako ukuncedisa ekunxibelelaneni nempahla okanye ukuhambisa iimpahla ngokwenkqubo echazwe ngumthengi.

• Umbuzo: Bude kangakanani ubomi beshelufu yemveliso?

  A: Ngaphantsi kweemeko eziqhelekileyo zokugcinwa (indawo eyomileyo, enomoya kunye ne-non-corrosion), ubomi beshelufu ziinyanga ezili-12 (ukususela kumhla wokwenziwa).

• Umbuzo: Ungayifumana njani isampuli?

  A: Iisampulu ezinobungakanani obuncinci zinokubonelelwa simahla (impahla iqokelelwa). Nceda ugcwalise "iSample Application Form" kwaye ubonise injongo.